 |
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
 |
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed different. Length of corpus... more |
4,90Euro
|
|
 |
Microswitch with roller for hoppers. Lenght of lever: 15 mm (.60 inch), breadth of terminals: 4.8 mm (.187 inch).... more |
1,85Euro
|
|
 |
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 10 mm (0.394 inch). This product is for repl... more |
0,19Euro
|
|
 |
Green LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usu... more |
1,25Euro
|
|
 |
Mini rocker switch with green LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-ter... more |
3,25Euro
|
|
 |
Driver board for up to 16 standard LEDs or solenoids, no additional power required (supplied via USB connection). Output voltage: 5 volt, total current: 500 mA. Full suppor... more |
32,95Euro
|
|
 |
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
 |
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 27... more |
4,75Euro
|
|
| |
Blue LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usua... more |
1,25Euro
|
|
 |
Female push on connector made of tinned brass, non-insulated. Breadth: 2.8 mm (0.110 inch), thickness: 0.5 mm (0.02 inch). For use with wire cross sections from 0.2 to 0.5 ... more |
0,10Euro
|
|
 |
Standard microswitch as used for most kinds of arcade pushbuttons and several illuminated pushbuttons. Breath of terminals: 4.8 mm (.187 inch).... more |
0,60Euro
|
|
 |
Set of 4 nylon feet with aluminium shell 0.4 mm (0.016 inch) thick. For use with typical arcade controllers and any common medium sized control panels. EVA foam padded to r... more |
4,99Euro
|
|
 |
Blue LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usua... more |
1,15Euro
|
|
 |
White plastic cable clamp for bundling and fixing of one or more cables with an overall diameter of maximum 3/16 inch (4.7 mm). Included are: a bag of 100 cable clamps.... more |
4,50Euro
|
|
|
