 |
7-pin switch lock made of chromed brass with crimp connection for cables up to 2.5 mm˛. Normally open, momentary contact - for example use it to send a coin signal giving f... more |
5,35Euro
|
|
 |
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
 |
Standard microswitch as used for most kinds of arcade pushbuttons and several illuminated pushbuttons. Breath of terminals: 4.8 mm (.187 inch).... more |
0,60Euro
|
|
 |
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm high (4.134 inch), 148 mm wide (5.827 inch), Quality: 3... more |
0,89Euro
|
|
 |
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 5 mm (0.197 inch). This product is for repla... more |
0,25Euro
|
|
 |
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 27... more |
4,75Euro
|
|
 |
Cover for button holes with a diameter of 24 mm (0.945 inch). Can be mounted in material with a thickness from 2 to 4 mm (0.08 - 0.16 inch).... more |
1,50Euro
|
|
 |
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 10 mm (0.394 inch). This product is for repl... more |
0,19Euro
|
|
 |
Fixes the cover of your cocktail video cabinet. Made of stainless steel. Thickness: 1 mm (0.04 inch), Radius of curvature: 10 mm (0.394 inch), length of arms: 42 mm (1.654 ... more |
1,60Euro
|
|
 |
Fixes some kinds of overlays and (for example) protects corners of your particle board based controller. Made of stainless steel. Thickness: 0.5 mm (0.02"), lenght of arms:... more |
1,45Euro
|
|
 |
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
 |
Net made of lacquered iron for covering of apertures or speakers. Measurement: 100 x 100 mm (3.94 x 3.94 inch).... more |
1,25Euro
|
|
 |
White LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usu... more |
1,15Euro
|
|
 |
Molded black plastic handle for easy moving. Outside dimensions: 65 mm x 153 mm, inner dimensions: 34 mm x 108 mm, installation depth: 45 mm.
More information: Details and... more |
1,85Euro
|
|
 |
Jamma edge connector with 56 pins (2 rows, 28 pins each row). Used to connect printed circuit game boards with an amusement machine. Gilt contacts, numbered and alphabetise... more |
2,57Euro
|
|
|
