 |
Jamma edge connector with 56 pins (2 rows, 28 pins each row). Used to connect printed circuit game boards with an amusement machine. Gilt contacts, numbered and alphabetise... more |
2,57Euro
|
|
 |
Female push on connector made of tinned brass, non-insulated. Breadth: 4.8 mm (0.187 inch), thickness: 0.5 mm (0.02 inch). For use with wire cross sections from 0.5 to 1.25... more |
0,10Euro
|
|
 |
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
 |
Lampholder for T 3.25 (10 mm) wedge base lamps and LEDs. Can be mounted in 1 mm (0.04 inch) thick steelplates. Breadth of terminals: 6.3 mm (0.250 inch).
More information:... more |
1,25Euro
|
|
 |
Mini rocker switch with yellow LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-te... more |
3,25Euro
|
|
 |
Cover for button holes with a diameter of 24 mm (0.945 inch). Can be mounted in material with a thickness from 2 to 4 mm (0.08 - 0.16 inch).... more |
1,50Euro
|
|
 |
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
 |
Cover for speakers (grill) or ventilation systems for your Arcade cabinet, made of coated zinc plate. Outer diameter: 112 mm (4.41 inch), inner diameter: 78 mm (3.07 inch),... more |
0,99Euro
|
|
 |
Molded cream white plastic handle for easy moving. Outside dimensions: 65 mm x 153 mm, inner dimensions: 34 mm x 108 mm, installation depth: 45 mm.
More information: Detai... more |
1,70Euro
|
|
 |
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
 |
44-pole fingerboard connector with 22 pins on each side, numbered and alphabetised. Pitch: 3.97 mm (0.156 inch).... more |
1,38Euro
|
|
 |
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 32... more |
4,90Euro
|
|
 |
Mini rocker switch with green LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-ter... more |
3,25Euro
|
|
 |
Driver board for up to 16 standard LEDs or solenoids, no additional power required (supplied via USB connection). Output voltage: 5 volt, total current: 500 mA. Full suppor... more |
32,95Euro
|
|
 |
Blue LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usua... more |
1,15Euro
|
|
|
