 |
Green LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usu... more |
1,15Euro
|
|
 |
Set of 4 nylon feet with aluminium shell 0.4 mm (0.016 inch) thick. For use with typical arcade controllers and any common medium sized control panels. EVA foam padded to r... more |
4,99Euro
|
|
 |
Net made of lacquered iron for covering of apertures or speakers. Measurement: 100 x 100 mm (3.94 x 3.94 inch).... more |
1,25Euro
|
|
 |
Microswitch with roller for hoppers. Lenght of lever: 15 mm (.60 inch), breadth of terminals: 4.8 mm (.187 inch).... more |
1,85Euro
|
|
 |
Female push on connector made of tinned brass, non-insulated. Breadth: 2.8 mm (0.110 inch), thickness: 0.5 mm (0.02 inch). For use with wire cross sections from 0.2 to 0.5 ... more |
0,10Euro
|
|
 |
Mini rocker switch with yellow LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-te... more |
3,25Euro
|
|
 |
Mini rocker switch with red LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-termi... more |
3,25Euro
|
|
 |
Cover for speakers (grill) or ventilation systems for your Arcade cabinet. Outer diameter: 129 mm (5"), inner diameter: 98 mm (3.85"), height: 4 mm (0.15").... more |
1,25Euro
|
|
 |
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 27... more |
4,75Euro
|
|
 |
Slider for smaller amusement machines. Made of zinced steel, manufactured in EU. Enables easy relocation of your cabinet on floors with needle felt or similar.
More info... more |
1,75Euro
|
|
 |
Cover for button holes with a diameter of 30 mm (1.181 inch). Overall diameter: 34 mm (1.34 inch). Can be mounted in material with a thickness of 3 mm (0.118 inch).... more |
0,90Euro
|
|
 |
Mini rocker switch with green LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-ter... more |
3,25Euro
|
|
 |
44-pole fingerboard connector with 22 pins on each side, numbered and alphabetised. Pitch: 3.97 mm (0.156 inch).... more |
1,38Euro
|
|
 |
PCB edge connector with 36 pins (2 rows, 18 pins each row). Used to connect coin selector and pcb of arcade machines. Gilt contacts, numbered and alphabetised, RoHS complia... more |
1,80Euro
|
|
| |
Red LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usual... more |
1,15Euro
|
|
|
