|
7-pin switch lock made of chromed brass with crimp connection for cables up to 2.5 mm˛. Normally open, momentary contact - for example use it to send a coin signal giving f... more |
5,35Euro
|
|
|
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 10 mm (0.394 inch). This product is for repl... more |
0,19Euro
|
|
|
Set of 4 nylon feet with aluminium shell 0.4 mm (0.016 inch) thick. For use with typical arcade controllers and any common medium sized control panels. EVA foam padded to r... more |
4,99Euro
|
|
|
PCB edge connector with 20 pins (2 rows, 10 pins each row). Gilt contacts, numbered and alphabetised, RoHS compliant. Pitch: 3.97 mm (0.156 inch).... more |
1,54Euro
|
|
|
Blue LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usua... more |
1,15Euro
|
|
|
Sub-Miniature microswitch as used in our smaller illuminated pushbuttons or the Redball Ministick. Breadth of terminals: 2.8 mm (.110 inch).... more |
1,80Euro
|
|
|
44-pole fingerboard connector with 22 pins on each side, numbered and alphabetised. Pitch: 3.97 mm (0.156 inch).... more |
1,38Euro
|
|
|
Microswitch with roller for hoppers. Lenght of lever: 15 mm (.60 inch), breadth of terminals: 4.8 mm (.187 inch).... more |
1,85Euro
|
|
|
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
|
Doorswitch with 3 pins (one pole only). Electric circuit can be closed by push or pull. Breadth of terminals: 6.3 mm (.250 inch).... more |
2,80Euro
|
|
|
Genuine Seimitsu brand momentary microswitch as used in Japanese style arcade pushbuttons like PS-14-G, PS-14-GN, PS-14-GN-CP and PS-14-KN. Breadth of terminals: 2.8 mm (.1... more |
1,50Euro
|
|
|
Female push on connector made of tinned brass, non-insulated. Breadth: 4.8 mm (0.187 inch), thickness: 0.5 mm (0.02 inch). For use with wire cross sections from 0.5 to 1.25... more |
0,10Euro
|
|
|
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 21... more |
4,50Euro
|
|
|
Red LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usual... more |
1,15Euro
|
|
|
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
|