|
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 10 mm (0.394 inch). This product is for repl... more |
0,19Euro
|
|
|
Female push on connector made of tinned brass, non-insulated. Breadth: 2.8 mm (0.110 inch), thickness: 0.5 mm (0.02 inch). For use with wire cross sections from 0.2 to 0.5 ... more |
0,10Euro
|
|
|
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 5 mm (0.197 inch). This product is for repla... more |
0,25Euro
|
|
|
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
|
Dual socket USB charger which looks alike a pushbutton. Input: 7.5V ~ 28V DC. Output: 5V ± 5% 1A and 2.1A DC. Mounting Diameter: 29.9 mm (1.18 inch). RoHS compliant.... more |
16,95Euro
|
|
|
Instruction Card designed by LowRez. With blanks to be filled with your individual gaming commands. Measures: 105 mm wide (4.134 inch), 148 mm high (5.827 inch), Quality: 3... more |
0,89Euro
|
|
|
Jamma edge connector with 56 pins (2 rows, 28 pins each row). Used to connect printed circuit game boards with an amusement machine. Gilt contacts, numbered and alphabetise... more |
2,57Euro
|
|
|
White plastic cable clamp for bundling and fixing of one or more cables with an overall diameter of maximum 3/16 inch (4.7 mm). Included are: a bag of 100 cable clamps.... more |
4,50Euro
|
|
|
Mini rocker switch with green LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-ter... more |
3,25Euro
|
|
|
Driver board for up to 16 standard LEDs or solenoids, no additional power required (supplied via USB connection). Output voltage: 5 volt, total current: 500 mA. Full suppor... more |
32,95Euro
|
|
|
Microswitch with roller for hoppers. Lenght of lever: 15 mm (.60 inch), breadth of terminals: 4.8 mm (.187 inch).... more |
1,85Euro
|
|
|
Cover for button holes with a diameter of 24 mm (0.945 inch). Can be mounted in material with a thickness from 2 to 4 mm (0.08 - 0.16 inch).... more |
1,50Euro
|
|
|
Cover for button holes with a diameter of 30 mm (1.181 inch). Overall diameter: 34 mm (1.34 inch). Can be mounted in material with a thickness of 3 mm (0.118 inch).... more |
0,90Euro
|
|
|
Genuine Seimitsu brand momentary microswitch as used in Japanese style arcade pushbuttons like PS-14-G, PS-14-GN, PS-14-GN-CP and PS-14-KN. Breadth of terminals: 2.8 mm (.1... more |
1,50Euro
|
|
|
7-pin tumbler lock made of chromed brass with straight cam and round key. If locked, key is ejected by smooth spring action. All locks are keyed alike. Length of corpus: 27... more |
4,75Euro
|
|
|