 |
Microswitch with roller for hoppers. Lenght of lever: 15 mm (.60 inch), breadth of terminals: 4.8 mm (.187 inch).... more |
1,85Euro
|
|
 |
Latch made of brass, 2.8 mm thick. Can be combined with this lock. Length of shank is 21 mm.... more |
3,50Euro
|
|
 |
Yellow LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of us... more |
1,15Euro
|
|
| |
Green LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usu... more |
1,15Euro
|
|
 |
PCB edge connector with 36 pins (2 rows, 18 pins each row). Used to connect coin selector and pcb of arcade machines. Gilt contacts, numbered and alphabetised, RoHS complia... more |
1,80Euro
|
|
 |
Mini rocker switch with yellow LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-te... more |
3,25Euro
|
|
| |
Blue LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usua... more |
1,15Euro
|
|
 |
Mini rocker switch with green LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-ter... more |
3,25Euro
|
|
 |
Glass lamp for use in illuminated pushbuttons or pinball machines and similar. Operating voltage: 12 V, output: 1.2 W, breadth: 5 mm (0.197 inch). This product is for repla... more |
0,25Euro
|
|
| |
White LED with wedge base equipped with a resistor. For use in illuminated pushbuttons or pinball machines and similar as a great more economical alternative instead of usu... more |
1,15Euro
|
|
 |
Mini rocker switch with red LED illumination. Maximal load: 10 Amp at 125 Volt (accordingly 5 Amp at 250 Volt). Breadth of switch terminals: 4.8 mm (0.187 inch), LED-termi... more |
3,25Euro
|
|
 |
Cover for button holes with a diameter of 30 mm (1.181 inch). Overall diameter: 34 mm (1.34 inch). Can be mounted in material with a thickness of 3 mm (0.118 inch).... more |
0,90Euro
|
|
 |
Genuine 5-pin joystick harness as used in Japanese arcade machines. Wiring up Sanwa joystick models in JLF-TP-8 design or Seimitsus LS-32-01 within seconds. Length of cable... more |
3,95Euro
|
|
 |
Net made of lacquered iron for covering of apertures or speakers. Measurement: 100 x 100 mm (3.94 x 3.94 inch).... more |
1,25Euro
|
|
 |
Sub-Miniature microswitch as used in our smaller illuminated pushbuttons or the Redball Ministick. Breadth of terminals: 2.8 mm (.110 inch).... more |
1,80Euro
|
|
|
